现货 118-43极为柔韧，可移印，导电油墨

现货 118-43极为柔韧，可移印，导电油墨

说明：118-43是一种极为柔软、可移印、导电油墨、涂料和粘合剂

适用于移印、浸渍和注射器配药。本产品具有良好的附着力

卡普顿，聚酯薄膜，玻璃和其他各种表面。与传统的导电材料不同，这种产品

抗弯曲和起皱。118-43的一些应用包括但不限于

聚酰亚胺挠性电路，聚合物厚膜电路，薄膜开关，表面电气附件

钽电容器的安装装置和阳极涂层。118-43是101-59的可移印版本。

典型固化特性：

稠度光滑膏

填充银

银含量，固化>84

抗皱性佳

体积电阻率（Ω-cm）0.000025

片电阻率（Ω/sq）0.01

玻璃化转变温度（℃）75

水解稳定性优异

有效温度范围（℃）-55至+200

热稳定性（摄氏度）达到325

建议的处理和固化：118-43已准备好可供使用。可以进一步细化

加入少量cmi稀释剂113-39（快干）或114-20缓凝剂（慢干）。在使用之前，

一定要把银重新挂起来。对于大多数应用，在170℃下固化5-10分钟可获得性能。

通过在50°C至

180°C。建议终用户通过实验确定适合个人的温度和时间

应用。

贮存期：25℃下保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免长时间

接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

现货 118-43极为柔韧，可移印，导电油墨

 118-43
EXTREMELY FLEXIBLE, PAD-PRINTABLE, ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 118-43 is an extremely flexible, pad printable, electrically conductive ink, coating and adhesive
suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to
Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very
resistant to flexing and creasing. Some applications for 118-43 include, but are not limited to, emi/rfi shielding of
polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface
mounted devices, and anode coatings for tantalum capacitors. 118-43 is a pad-printable version of 101-59.
TYPICAL CURED PROPERTIES:
 Consistency Smooth Paste
 Filler Silver
 Percent Silver, cured > 84
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.000025
 Sheet Resistivity (Ω/sq) 0.01
Glass Transition Temperature (°C) 75
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
 Thermal Stability (°C) Good to 325
SUGGESTED HANDLING & CURING: 118-43 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI Thinners #113-39 (fast drying), or 114-20 Retarder (slow drying). Prior to using,
be certain to re-suspend silver. Best properties, for most applications, result when cured for 5-10 minutes at 170°C.
Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to
180°C. End user is advised to experimentally determine temperature and time best suited for individual
applications.
STORAGE: Shelf Life: 12 months at 25°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.