125-13ELECTRICALLY CONDUCTIVE导电油墨

125-13ELECTRICALLY CONDUCTIVE导电油墨

说明：125-13是一种导电油墨和涂料，适用于屏幕应用

打印、浸渍和注射器分配。。与传统导电材料不同，125-13能够

以非常精细的线条宽度和间距印刷。本产品对卡普顿具有*的附着力，

聚脂薄膜，ITO溅射表面，玻璃和其他各种表面。这种产品对

弯曲和折痕。125-13的一些应用包括但不限于

聚酰亚胺柔性电路，聚合物厚膜电路，薄膜开关。

典型固化特性：

稠度光滑膏

填充银

银百分比，*84

抗皱性佳

体积电阻率（Ω-cm）0.00004

片材电阻率（Ω/sq/mil）0.015

可焊性编号

水解稳定性优异

有效温度范围（℃）-55至+200

热稳定性（摄氏度）达到325

湿覆盖（in2

/gm/mil）22.6分

比重2.6

建议的处理和固化：125-13已准备好供应使用。进一步变薄可能是

通过添加少量较薄的cmi 120-08来完成。使用前一定要重新使用

银色的。对于大多数应用而言，在170°C至180°C下固化几分钟可获得性能。

通过在不同温度下干燥和固化，可在多种基材上获得良好的性能

50°C至150°C。建议终用户通过实验确定适合

个人申请。

贮存期：25℃下保存6个月；5℃下保存9个月；或-10℃下保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免

长时间接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

125-13ELECTRICALLY CONDUCTIVE导电油墨

125-13
ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 125-13 is an electrically conductive ink and coating suitable for application by screen
printing, dipping and syringe dispensing. . Unlike conventional conductive materials, 125-13 is capable of
being printed at very fine line widths and spaces. This product features excellent adhesion to Kapton,
Mylar, ITO sputtered surfaces, glass and a variety of other surfaces. This product is very resistant to
flexing and creasing. Some applications for 125-13 include, but are not limited to, EMI/RFI shielding of
polyimide flexible circuits, polymer thick film circuitry, and membrane switches.
TYPICAL CURED PROPERTIES:
 Consistency Smooth Paste
 Filler Silver
 Percent Silver, cured 84
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.00004
 Sheet Resistivity (Ω/sq/mil) 0.015
 Solderable No
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
 Thermal Stability (°C) Good to 325
Wet Coverage (in2
/gm/mil) 22.6
 Specific Gravity 2.6
SUGGESTED HANDLING & CURING: 125-13 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of thinner CMI# 120-08. Prior to using, be certain to resuspend
silver. Best properties, for most applications, result when cured for several minutes at 170°C to 180°C.
Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from
50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for
individual applications.
STORAGE: Shelf Life - 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.