124-33柔性导电胶

124-33柔性导电胶

说明：124-33是一种柔性导电胶。这个产品的特点很好

粘附到Kapton？、Mylar？、玻璃和各种其他基材上。不像传统的传导

材料方面，本产品具有很强的抗折性。产品可以通过

简单的加热和轻微的压力。124-33的一些应用包括但不限于：

EMI/RFI外壳中表面安装设备和热封开口的电气附件。124个-

33适用于在非常低的温度下需要灵活性的应用。124-33具有更高的玻璃

转变温度比常规106-48低，电阻率比107-02低。

典型固化特性：

稠度液体

填充银

抗皱性佳

体积电阻（Ω-cm）0.0005

片材电阻率（Ω/sq./mil）0.20

水解稳定性优异

有效温度范围（摄氏度）-55至120

热稳定性（摄氏度）达到200

建议的处理和固化：124-33已准备好按供应使用。进一步变薄可能是

通过添加少量的cmi稀释剂203来完成。使用前一定要重新挂起

银色的。对于大多数应用来说，在100℃下干燥几分钟后

在175℃下固化5-10分钟。通过在

温度范围为50°C至175°C。用作密封剂时，将粘合剂涂在

粘合并在150°C下干燥几分钟，然后在加热和涂抹时将基板放在一起

轻微的压力。建议终用户通过实验确定适合的温度和时间

个人申请。

贮存期：25℃下保存6个月；5℃下保存9个月；或-10℃下保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免

长时间接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

124-33柔性导电胶

124-33
FLEXIBLE ELECTRICALLY CONDUCTIVE ADHESIVE
DESCRIPTION: 124-33 is a flexible electrically conductive adhesive. This product features excellent
adhesion to Kapton®, Mylar®, glass and a variety of other substrates. Unlike conventional conductive
materials, this product is very resistant to flexing and creasing. Product can be re-bonded many times by
simply applying heat and slight pressure. Some applications for 124-33 include, but are not limited to,
electrical attachments for surface mounted devices and heat-sealing openings in emi/rfi enclosures. 124-
33 is useful for applications requiring flexibility at very low temperatures. 124-33 features a higher glass
transition temperature than the conventional 106-48 and a lower resistivity than 107-02.
TYPICAL CURED PROPERTIES:
Consistency Liquid
Filler Silver
Crease Resistance Excellent
Volume Resistance (Ω-cm) 0.0005
Sheet Resistivity (Ω/sq./mil) 0.20
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 120
Thermal Stability (°C) Good to 200

SUGGESTED HANDLING & CURING: 124-33 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of CMI Thinner #203. Prior to using, be certain to re-suspend
silver. Best properties, for most applications, result when dried several minutes at 100°C followed by
curing for 5-10 minutes at 175°C. Good properties are obtained on a variety of substrates by curing at
temperatures ranging from 50°C to 175°C. When used as a sealant, apply adhesive to surfaces to be
bonded and dry for several minutes at 150°C, then place substrates together while heating and applying
slight pressure. End user is advised to experimentally determine temperature and time best suited for
individual applications.
STORAGE: Shelf life: 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.