125-15 EXTREMELY CONDUCTIVE INK导电油墨

125-15 EXTREMELY CONDUCTIVE INK导电油墨
说明：125-15是一种具有*导电性的油墨/涂料，用于丝网印刷。
DESCRIPTION: 125-15 is an ink/coating with extremely high electrical conductivity for application by screenprinting,

125-15 EXTREMELY CONDUCTIVE INK导电油墨

说明：125-15是一种具有*导电性的油墨/涂料，用于丝网印刷。

浸渍和注射器分配。该产品与卡普顿、聚酯薄膜、玻璃和

其他基材的种类。该产品的优异导电性使终用户可以更窄地打印

和/或更长的电路跟踪线，不影响总的大欧姆值。正确使用这个

此功能可显著节省成本。与传统的导电材料不同，这种产品

耐磨、耐刮擦、耐弯曲、耐压痕。125-15的一些应用包括但不限于：

射频识别天线，聚酰亚胺柔性电路的电磁干扰/射频屏蔽，聚合物厚膜电路，薄膜开关和

钽电容器涂层。

典型特性：

粘度（cps）29000

填充银

银百分比（固化）>84

抗皱性佳

大体积电阻（Ω-cm）0.00003

薄片电阻率（Ω/平方/密耳）0.010

水解稳定性优异

有效温度范围（℃）-55至+200

 

建议的处理和固化：125-15已准备好供应使用。可以进一步细化

加入少量的CMI稀释剂112-19和/或105-36。使用前，一定要混好重新悬浮

银色的。在110°C下固化3至5分钟后，大多数应用的性能佳。性能优异

通过在50°C至175°C的温度下固化，也可在多种基材上获得。终用户是

建议通过实验确定适合个人应用的温度和时间。

贮存期：25℃下保存2个月；5℃下保存6个月；或-10℃下保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免长时间

接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

125-15 EXTREMELY CONDUCTIVE INK导电油墨

125-15
EXTREMELY CONDUCTIVE INK
DESCRIPTION: 125-15 is an ink/coating with extremely high electrical conductivity for application by screenprinting,
dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a
variety of other substrates. The superior conductivity of this product allows the end user to print narrower
and/or longer circuit trace lines without compromising overall maximum ohm values. The proper use of this
feature can result in a significant cost saving. Unlike conventional conductive materials, this product is very
resistant to abrasion, scratching, flexing and creasing. Some applications for 125-15 include, but are not limited to,
RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and
coatings for tantalum capacitors.
TYPICAL PROPERTIES:
Viscosity (cps) 29,000
Filler Silver
Percent Silver (cured) > 84
Crease Resistance Excellent
Volume Resistance, max. (Ω-cm) 0.00003
Sheet Resistivity (Ω/square/mil) 0.010
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to +200

SUGGESTED HANDLING & CURING: 125-15 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI thinner 112-19 and/or 105-36. Prior to use, be certain to mix well to re-suspend
silver. Best properties for most applications result when cured for 3 to 5 minutes at 110°C. Excellent properties
are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is
advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf life: 2 months at 25°C; or 6 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.