OxyCycler A42OC 氧循环器A42oC

OxyCycler A42OC 氧循环器A42oC

多室

腔室可以多种组合控制。这包括同时、独立的气体控制、不同腔室中的不同气体百分比或不同时间的相同条件。您可以同时独立控制和配置两个腔室，这意味着您有一个控制配置文件和一个实验配置文件。

多变量

氧是一种广泛应用的缺氧和高氧的单一气体系统。二氧化碳是一种必须加以管理的动物废气，但在建模中也很有用。氮气在生物学上是中性的，因此在不干扰实验的情况下，它可以用来冲洗房间，降低氧气或二氧化碳的浓度。氧循环器A42OC用一个控制器同时管理三个。

控制是有效的

来自适配器吊舱传感器的反馈告诉氧循环器A42oC要注入的确切气体量。使用这种氧气/二氧化碳控制器进行动物建模不会浪费气体。进入Biospherix子室后的恢复速度很快，避免了与设定点的长期偏差。

多设定点

气体浓度可编程为随时变化。只需编程一系列设定点，每个设定点都与单独的时间相关。间歇性缺氧是一个常见的例子。

动态控制使操作者能够*地模拟自然条件，以及创造和操纵新的人工条件。

操作简单

一旦动物模型的氧气/二氧化碳控制器安装并配置好，就很容易了。每隔一段时间检查一次校准，不要用完煤气。否则一切都是自动的。该系统可以全年连续工作，也可以根据需要随时工作。

OxyCycler A42OC 氧循环器A42oC

MULTI-CHAMBER

Chambers can be controlled in many combinations. This includes simultaneous, independent gas control, different gas percentages in different chambers, or identical conditions at different times. You can independently control and profile two chambers at the same time, which means you have one control profile and one experimental profile.

MULTI-VARIABLE

O2 is a widely used single gas system for hypoxia and hyperoxia. CO2 is an animal off-gas that must be managed, but is also useful in modeling. N2 is biologically neutral, and thus used toflush chambers and lower either O2 or CO2 concentrations without interfering with the experiment. The OxyCycler A42OC manages the three simultaneously with a single controller.

CONTROL IS EFFICIENT

Feedback from the adapter pod’s sensors tells the OxyCycler A42OC the exact amount of gas to infuse. No gas is ever wasted with this O2/CO2 controller for animal modeling. Recovery after access is rapid within the BioSpherix sub chambers, which avoids prolonged deviations from the set-point.

MULTI-SETPOINT

The gas concentration can be programmed to change at any time. Simply program a series of setpoints each associated with a separate time. Intermittent hypoxia is a common example.

Dynamic control allows the operator the unique ability of simulating natural conditions, as well as creating and manipulating new artificial conditions.

OPERATION IS SIMPLE

Once the O2/CO2 controller for animal modeling is installed and configured, it’s easy. Check the calibration once in a while and don’t run out of gas. Otherwise it’s all automatic. The system can work continuously year round, or on occasion as needed.

 公司简介:总部设在美国纽约州北部, BioSpherix 公司自1982
年以来一直提供多种气体控制系统给生物医学研究。他们
专门制造各种气体设备监控做人类细胞培养与动物实验，在
新的干细胞技术和动物测试模型有广泛应用。根据各类实际研
究需要, 可配有各种系统, 堤供低氧气戓高氧气设置，二氧化
碳，一氧化氮，一氧化碳，和臭氧O3 的监测。并提供简单，模
块化和可扩展的培养箱兼容系统，提供的科学灵活性，
的制造工艺。