C-Chamber 细胞培养托盘室

C-Chamber 细胞培养托盘室

多重效率

c室是细胞中心亚室培养系统的基础。它由我们的任何气体控制器（所有生物活性气体，如O2、CO2、CO、NO等）实现功能化。

标准孵化器的优化与保护

在门关闭后，我们的气体控制器将迅速将C室内的空气恢复到您预先编程的设置，将您的电池暴露在室内氧气水平的时间降到低。如果与细胞中心的超级细胞室系统一起使用，暴露在室内的氧气水平将被*去除。

运输方便

用于细胞培养系统的培养箱子室的空间效率设计允许您在的条件下培养尽可能少的或尽可能多的培养皿，同时使用少的气体。在一个完整的培养箱或手套箱中，的氧气水平会消耗大量的气体。

孵化器实用

室内托盘、水盘、导轨和五金件均采用300系列不锈钢制造。用于细胞培养系统的培养箱子室由透明聚碳酸酯制成，门封具有磁性。温度由宿主培养箱控制。

C-Chamber 细胞培养托盘室

MULTIPLE EFFICIENCIES
The C-Chamber is the foundation of the cytocentric subchamber cell culture system. It is functionalized by any of our gas controllers (for all bioactive gases, e.g. O2, CO2, CO, NO, etc.)

OPTIMIZATION & PROTECTION IN STANDARD INCUBATORS
After the door is closed, our gas controller(s) will quickly restore the atmosphere inside the C-Chamber to your pre-programmed settings, minimizing the time your cells are exposed to room oxygen levels. If used with a cytocentric superchamber system, exposure to room oxygen levels is removed entirely.

EASY TRANSPORT
The space-efficient design of the incubator subchamber for cell culture systems allows you to culture as few or as many plates as you require in precise conditions with minimal gas usage. Extreme oxygen levels consume large amounts of gas in a full incubator or glovebox chamber.

PRACTICAL FOR INCUBATORS
Chamber trays, water pan, guides and hardware are all made of 300 series stainless steel. The incubator subchamber for cell culture systems is made of clear polycarbonate and the door seal is magnetic. Temperature is controlled by the host incubator.