现货BioFlex® Culture Plate，UniFlex® Cultur

BioFlex细胞培养板---现货供应

Flexible-bottomed culture plate that works with the Flexcell^® FX-5000™ Tension Systemto provide a mechanical load regimen to cells in monolayer (see Fig. 1 below).

• 6-well culture plate with total growth surface area of 57.75 cm².
• Rubber membranes are optically clear for direct viewing of cells with an inverted or upright microscope.
• Covalently bound matrix surfaces: Amino, Collagen (Type I or IV), Elastin, Pronectin^® (RGD), and Laminin (YIGSR). Learn more in Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment.
• Available individually or by the case of 40* plates.

Applications of BioFlex^® Culture Plates

• Mechanical Load - use with the FX-5000™ Tension System to research the effects of equibiaxial tensile strain on cells in monolayer culture.
• Softer Substrate - provides a softer substrate for cell growth (when compared to standard plastic culture dishes) which better mimics in situ conditions for some cell types like trabecular meshwork cells (see Aga et al. Invest Ophthalmol Vis Sci 55(9):5497-509, 2014).
• Matrix Coated Surface - culture plate surfaces are coated with various matrix proteins, such as type I collagen and laminin, to better simulate in vivo conditions (see Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment).
• Traumatic Injury - can be used in studies looking at traumatic injury in astrocytes and neurons, where the injury is produced with a Cell Injury Controller that controls a burst of gas which deforms the BioFlex^® membrane creating large biaxial strains (see Ellis et al. J Neurotrauma 12 325–339, 1995; Ahmed et al. J Neurochem 74(5):1951-1960, 2000; Augustine et al. Neuroscience 274:1-10, 2014).

Read more about Applying Mechanical Load to Cells in Monolayer Culture
 

Figure 1: Equibiaxial strain application (with a FX-5000™ Tension System) to cells plated in the well of a BioFlex® culture plate.

五种不同包被的培养表面：Amino, Collagen (Type I or IV), Elastin, ProNectin (R GD), Laminin (YIGSR).

光学性能佳，自身荧光低。

当与圆柱形加载平台共同使用时，可以对细胞进行均匀的径向和圆周应力加载。

订货信息（请世联博研公司）

产品编号  英文名称 

BF-3001U      BioFlex Culture Plate — Untreated

BF-3001A      BioFlex Culture Plate — Amino
 
BF-3001C      BioFlex Culture Plate — Collagen Type I
 
BF-3001C(IV)  BioFlex Culture Plate — Collagen Type IV

BF-3001E      BioFlex Culture Plate — Elastin

BF-3001P      BioFlex Culture Plate — ProNectin

BF-3001L      BioFlex Culture Plate — Laminin 

单向应力细胞培养板UniFlex&tade; Culture Plates---现货供应

Uniflex细胞培养板和FX-5000T应力加载系统配套使用，为单层细胞提供单轴向应力。
UniFlex细胞培养板和FX-5000T应力加载系统和TissueTrain细胞培养系统配套使用。
准确测量应力---负压系统曲线，保证应力的准确性和可重复性。
单轴向应力作用于宽0.6英寸x0.952英寸(3.68 cm2)的长方形区域中。
单轴向应力变幅在+/-1.5%.
五种不同包被的培养表面：Amino, Collagen (Type I or IV) Elastin, ProNectin (RGD), Laminin (YIGSR) 
为获得准确的单轴向应力，必须和弧矩形应力加载平台配套使用。
订货信息（请世联博研公司）
产品编号      英文名称
UF-4001U      UniFlex Culture Plate — Untreated 
UF-4001A      UniFlex Culture Plate — Amino 
UF-4001C      UniFlex Culture Plate — Collagen Type I 
UF-4001C(IV)  UniFlex Culture Plate — Collagen Type IV 
UF-4001E      UniFlex Culture Plate — Elastin 
UF-4001P      UniFlex Culture Plate — ProNectin 
UF-4001L      UniFlex Culture Plate — Laminin 

Flexible-bottomed culture plate that works with the FX-5000™ Tension System to provide uniaxial strain to cells in monolayer culture. 

• Uniaxial strain applied to a strain field represented by a 0.6" wide x 0.952" (3.68 cm²) long centrally located rectangular region.
• Arctangle™ Loading Stations™ are required for correct application of uniaxial strain (see Fig. 1 below; additional information located in the Tech Report).
• Covalently bound matrix surfaces: Amino, Collagen (Type I or IV), Elastin, Pronectin^® (RGD), and Laminin (YIGSR). Learn more in Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment.
• Available individually or by the case of 40*.

Applications of UniFlex^® Culture Plates

• Mechanical Load - use with the FX-5000™ Tension System to research the effects of uniaxial tensile strain on cells in monolayer culture.
• Softer Substrate - provides a softer substrate for cell growth when compared to standard plastic culture dishes, which better mimics in situ conditions for some cell types like trabecular meshwork cells (see Aga et al. Invest Ophthalmol Vis Sci 55(9):5497-509, 2014).
• Matrix Coated Surface - culture plate surfaces are coated with various matrix proteins to better simulate in vivo conditions (see Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment).
• Microgrooved Channels - plates have been modified to hold microgrooved channels molded with PDMS. Plates can then be mechanically loaded with the FX-5000™ Tension System, if desired (seeJones et al. J Biomech 38(8):1653-1664, 2005).

Read more about Applying Mechanical Load to Cells in Monolayer Culture
 

Figure 1: A) Arctangle® loading post. B) UniFlex® well. C) UniFlex® Culture Plate resting atopArctangle® Loading Station™.