1.本公司检验方法符合ISO 9001品质系统和标准要求.
Our test methods are conform with Quality System and the standard of enterprise which confirmed by nation.
2.本公司所出具的数据均可溯源于国家和计量基准.
The data are based on the measurement standard of national and international.
3.本报告未经签章无效,数据涂改无效.
It well be ineffective without certification ,data alter will be ineffective ,too.
4.客户可自由使用本报告,但须整份使用,不得任意摘录.校正结果仅对受校仪器当时之情况负责,受校仪器校正后之准确度,则视往后使用之小心程度及使用之频率而定.
Customer can use this report freely, but should used whole ,cannot extract willfully. Calibration result are only responsible for the condition of equipment at that moment. Precision of the equipment after calibrate of equipment after calibrate must according to frequency and carefulness degree of use.
5.本次检验的技术依据:
Reference documents for the calibration:
ASTMD999、ISTA 1A-2001、EN71
6.本次校正所使用的主要计量标准器具:
Main measure equipment is used in the calibration:
器具名称/型号 编号 证书号
Name of Equipment Serial No. Certificate No.
激光位移传感器 XR01060633 LCL20100622
转速表 DPH33202 GDSB20100326
7.检验地点,环境条件:
Inspect place and Environment condition.
地点: 温度: 相对湿度:
Place: Temperature: RH:
模拟运输振动试验机的技术参数：http://www.kshaida17.com/hgtc0808-Products-6849575/
15
