Features & Benefits

• Bandwidths up to 100 MHz
• Up to 5,600 V Differential （DC + pk AC）
• Up to 2,300 V Common （RMS）
• Overrange Indicator
• Safety Certified
• Switchable Attenuation
• Switchable Bandwidth Limit

Applications

• Floating Measurements
• Switching Power Supply Design
• Motor Drive Design
• Electronic Ballast Design
• CRT Display Design
• Power Converter Design and Service
• Power Device Evaluation

 

The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.

WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs （isolated inputs）, such as the Tektronix TPS2000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.

The P5210A is a Differential Probe that is capable of measuring floating voltages up to 5,600 V safely and has a bandwidth up to 50 MHz. It is supplied with two sizes of hook tips and has an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe. It can be used with Tektronix TEKPROBE™ interface oscilloscopes directly or with any oscilloscope with the use of the 1103 TEKPROBE^® Power Supply.

The P5205A is a 100 MHz Active Differential Probe capable of measuring fast rise times of signals in floating circuits. This 1,300 V differential probe can safely measure voltages in IGBT circuits such as motor drives or power converters. It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE^® interface. The P5202A is similar to the P5205A, but this probe has approximay half the attenuation and half the dynamic range of the P5205A and better signal-to-noise ratio.