Yaxin-1165 Chl-Fluo Kinetics Measurement System

Yaxin-1165 Chl-Fluo Kinetics Measurement System is the 4th generation chlorophyII fluorescence instrument, based on Yaxin-1l6lG and Yaxin-1162. It has been upgraded from the inside to the outside. In terms of appearance, it has a colour touchable display, a humanized industrial design, and applies ABS environmental protection material. In terms of functionally, it is equipped with eight fixed measurement modes. Moreover, a custom mode for experienced users is provided for some experienced users, that can measure Q_A-reoxidation kinetics and S-state transitions. It truly enables" measure anything you want" in fluorescence kinetics. In terms of performance, over the last 10 years, our company has overcome the problem of weak signal instability in low light by improving the signal-to-noise ratio. It makes the weak signal experimental data more authentic and credible. In addition, to fully meet the needs of users, we have launched a two-color three-light configuration, as well as red and blue LED matched to the actinic light.

I. Instrument Function

1.OJP Mode (OЛP)

2.Slow Kinetics (SP)

3.Rapid Light Response Curve (RLC)

4.Dark Relaxation (DR)

5.After Steady-state (After steady-state Model)

6.PIFR Mode (PIFR)

7.Multi-pulse-OJIP (MP-OJP)

8.Fo' Mode

Ⅱ. Technical Parameters

1. Light type

Saturation pulse light:470nm; light intensity:0~8000 μ mol m^-2 s^-1 adjustable (0~12000 μ mol  m^-2s^-1 adjustable in custom mode), duration time adjustable.

Action light: 470nm (650nm optional), range:0~3500 μ mol m2 s, measurement time: 1~l0 minutes.

Light adaptation light:470nm(650nm optional), range:0~2000 μ mol m^-2s^-1, measurement time: l~10 minutes.

Far-red light:730nm; duration time:0~60s.

Narrow pulse:1~200Hz (frequency); light intensity:0~5000 μ mol m^-2 s^-1.

2. The shortest sampling interval: 5 μ s each time, continuous pulse.

3. Detector: PIN silicon photodiode.

4. Storage capacity: built-in 256 MB + external SD card 32GB.

5. Data transfer: The two modes are virtual U disk mode and transfer to external SD card mode. Data transmission is carried out with the PC through the USB interface, and the data on the PC is stored in the form of original binary data, data tables and graphics.

6. Screen: 8-inch 800 x 600 color touch screen, Chinese/English operation interface optional.

7. Keyboard: Capacitive touch keyboard.

8. Battery: indoor can be connected to 220V mains, with rechargeable lithium battery:8 4V 7Ah, battery life more than 12 hours.

9. Weight: 2.0 Kg.

10. Volume: 28 x 20 x 14 cm.

11. Dark leaf-clip: slide rail type is 70 x 25 x 5 mm, which is suitable for the measurement of most leaves. There are other dark leaf-clips which suitable for larger leaves.

12. Working environment temperature:0~50°C, Humidity:0~90% RH (without condensation).

13 Storage temperature: -20~50°C.