FLR-Y03A 眼镜架鼻梁边缘抗弯变形测试仪
参考价 | ¥1000.00 |
- 公司名称 天津弗洛拉自动化科技有限公司
- 品牌其他品牌
- 型号FLR-Y03A
- 所在地东莞市
- 厂商性质生产厂家
- 更新时间2023/4/15 16:10:14
- 访问次数 224
定金 | 1000.00元 | 10 台 可售 |
联系方式:王小五13809279727 查看联系方式
联系我们时请说明是化工仪器网上看到的信息,谢谢!
应用领域 | 医疗卫生,环保,文体,烟草,综合 |
---|
眼镜架鼻梁边缘抗弯变形测试仪
鼻梁变形测试仪
测试原因:测定镜架具有一定的镜片保留能力,保证镜架可安全佩戴2年或以上,防止镜片因轻微的冲击而脱落或扭拧而变形,影响佩戴效果。
参考标准:EN1836:2005、ISO12870:2004、GB/T14214:2019等等
技术参数:
1、环形夹具直径:25mm±2mm
2、加压杆直径:10mm±1mm
3、运行装置:电动+气动
4、压力值:5N
5、持压时间:5s
6、计时装置:电子显示自动计时
测试方法及标准:
1.确定左右镜片几何中心点,并计算两中心点距离C(参考标准:ISO8624);
2.在镜片中心点2mm范围内夹住镜片,并使未夹镜片保持水平状态;
3.调整下降压杆,使其落点刚好处于中心点2mm范围内,记下此值为初始值;
4.设定压力为5N,启动仪器,使位移相当于两镜片几何中心距C的10,保持5秒;
5.将压杆回复原位,放松20秒
6.检查镜架是否有裂缝,并测定鼻梁变形百分比(变形量不超过2)。
Edge Transverse Test
Frames to be tested shall be propery glazed.For purposes of unifomity, 6base,2-mm 0.08-in) nominal-centr thickness, V-beveled plano power glass is recommended.The right eyewire of the frame to be tested shal be clamped fimly in the vertical position as wom,with the left eyewire unsupported. A spring balance shall be used to apply a downward force of22.24 Newtons(5-bf) to the endpiece area of the left eye.Pressure shall be released immediately after reaching the 22.24-Newton (5-bf)level. Upon removal of theload, no deformation shal be apparent in the frame.
眼镜架鼻梁边缘抗弯变形测试仪
Flat Transverse Test
Frames to be tested shall be properly glazed.For purposes of uniformity,6-base,2-mm (0.08-in) nominal-center thickness, V-beveled plano power glassisrecommended.The frame to be tested shall be laid on afirm, level supportwith the front lens surface downward so that one eye and one-half of the bridge project beyond the edge of the support. The frame shall be clamped frmly in position.A spring balance shall be used to apply a downward force of 4.45 Newtons(1-lbf)to the projecting endpiece area of the frame.Pressure shall be released immediately afterreaching the 4.45-Newton (1-Ibf)level.Upon removal of the load, no deformation shall be apparent in the frame
相关分类
- 拉力试验机
- 万能试验机
- 材料试验机
- 压力试验机
- 摩擦磨损试验机
- 测力仪(测力计)
- 高频试验机
- 电压击穿试验仪
- 持久/蠕变试验机
- 引伸计
- 平衡机
- 减震器试验台
- 杯突试验机
- 弹性模量/阻尼分析仪
- 抗折试验机
- 加速度计
- 冲击试验机
- 冲击试验缺口拉床
- 振动台
- 冲击台
- 耐磨试验机
- 碰撞台
- 耐寒试验机
- 压缩试验机
- 冲击试验缺口投影仪
- 跌落试验机、跌落试验台
- 剥离/破裂强度试验机
- 鞋类试验机
- 橡胶试验机
- 柔软度试验机
- 电线专用试验机
- 插头专用试验机
- 纸箱包装试验机
- 胶带专用试验机
- 运动器材试验机
- 热变形试验机
- 疲劳试验机
- 扭转试验机、弯曲试验机
- 附着力测试仪
- 弹簧试验机
- 爆破试验机
- 环刚度试验机
- 应力腐蚀试验机