制品型遇水膨胀止水条报价

制品型遇水膨胀止水条报价

制品型遇水膨胀止水条是一种既有一般橡胶制品的性能,又有遇水自行膨胀的性能的新型防水材料。止水，防水效果比一般橡胶止水条更为可靠。
The product type water swelling stop bar is a new type of waterproof material, which has both the properties of the general rubber products and the self expansion of water. Water stop, waterproof effect is more reliable than the general rubber sealing strip.
A、在橡胶遇水后会产生至少1-5倍的膨胀变形，并充满接缝的所有不规则表面，空穴及间隙，同时产生巨大的接触压力，*防止渗漏;
A, when rubber meets water, it will produce at least 1-5 times of expansion deformation, and all irregular surfaces, holes and gaps full of joints. At the same time, it will generate huge contact pressure and prevent leakage compley.
B、当接缝或施工缝发生位移，造成间隙超出材料弹性范围时，普通型橡胶止水材料则失去止水作用，而该产品还可以通过吸水膨胀来止水。
B, when the joints or construction joints are displaced, causing gaps beyond the elastic range of materials, the ordinary rubber sealing materials will lose the sealing effect, and the product can also stop water by water swelling.
C、使用遇水膨胀橡胶作为堵漏密封止水材料，不仅用量节省，而且还可以清除一般弹性材料因过大压缩而引起弹性疲劳的特点，使防水效果更可靠，耐水性，耐化学性能和耐老化性能良好。
C, the use of water swellable rubber as plugging and sealing sealing material, not only the amount of savings, but also can remove the general elastic material due to excessive compression and elastic characteristics cause fatigue, waterproof effect is more reliable, water resistance, chemical resistance and good aging resistance.
D、它主要应用于盾构施工法现砌接缝防水，建筑物变形缝，施工缝用止水带以及金属构件，混凝土预制构件接缝防水。
D is mainly applied to shield construction method, such as building joint waterproofing, building deformation joints, waterproofing strips and metal components for construction joints, and waterproofing joints for precast concrete members.

制品型遇水膨胀止水条报价
⑴对有预留式的粘贴方式，在先浇混凝土中需预留上止水条安放槽(可在模板中钉木条预留)。
1 of reserved paste type, reserved on the seal groove to be placed first in concrete (in the nail in the wood template reserved).
⑵拆除先浇混凝土模板后，清除表面，使缝面无水、干净、无杂物。
The surface of the pre cast concrete is removed after the template, the seam surface water, clean.
⑶将止水条嵌入预留槽内。如不预留槽，对垂直缝可加用粘结剂全长粘贴，或用水泥钉加木条固定止水条;对水平缝可直接粘贴于混凝土表面。
It will seal embedded preformed groove. If no slot is reserved, the vertical joint can be cemented with full length paste, or fixed with cement pin and wood bar, and the horizontal seam can be directly pasted on the concrete surface.
(4)止水条粘贴以后应尽快浇注混凝土。
(4) the concrete should be poured as soon as the water stop bar is pasted.
(5)在安装粘贴过程中，应防止止水条受污染和受水的作用，以免景响使用效果。
(5) during the installation and stickup process, it should be prevented from being polluted and affected by water so as to avoid the effect of the use of the scene.
(1)需粘贴固定止水条的施工缝，后浇缝的界面应保持干燥、平整，施工前须清除界面上浮渣、尘土及物。
(1) the construction joint of the fixed water stop should be pasted. The interface of the post pouring seam should be kept dry and smooth. The slag and dust and dust on the interface must be removed before construction.
(2)止水条安装部位确定后，在需安放止水条的界面上和止水条的底面元气涂上薄薄一层胶粘剂，待粘液挥发一段时间后再进行粘贴，或用高强度锚钉将止水条固定在安装的部位。
(2) after confirming the installation location of the water stop, the thin layer of adhesive should be coated on the bottom of the sealing strip and the bottom of the water seal strip after the confirmation of the location of the sealing strip. After the volatile liquid is volatilized for a period of time, it will be pasted again or the anchor bar will be fixed on the installation part with the high strength anchor.
(3)若遇混凝土界面潮湿或凹凸不平，胶粘剂粘贴固定不牢时，可视具体状况用高强度锚钉进一步加强固定。总之，止水条必须与混凝土界面紧密接触固定牢实，防止止水条脱离界面而推动抗渗的作用。
(3) if the concrete interface is wet or uneven, adhesive paste is not firmly fixed, according to the actual situation with high strength anchor to further strengthen fixed. In short, water must be close contact with concrete interface Laoshi fixed sealing strip, prevent from interface and promote anti permeability role.