J161 美国ADI气泵J系列DIA-VAC泵
- 公司名称 天津恩耐德科技有限公司
- 品牌
- 型号 J161
- 产地
- 厂商性质 经销商
- 更新时间 2024/3/17 8:32:00
- 访问次数 3625
联系方式:耿春建13581766549,15330222233 查看联系方式
联系我们时请说明是化工仪器网上看到的信息,谢谢!
pH电极,溶氧电极,pH控制器,溶氧仪,汉密尔顿电极,梅特勒pH电极,梅特勒溶氧电极,艾默生仪表,罗斯蒙特1056水质分析,Rosemount 1056仪表,EMEC计量泵,EMEC水质分析仪表,Airmac电磁气泵,亚力达气泵,SEKO计量泵,固瑞克Husky气动隔膜泵,自动加药系统
Product Description产品描述
J-Series Dia-Vac® gaseous diaphragm sampling pumps are compley self contained and may be used for either built-in or portable applications. These economical oil-free, contamination-free and leak-free diaphragm pumps offer up to 13 SLPM, 23 InHg, and 29 PSIG in a single head configuration. J-Series Dia-Vac® pumps are exceptionally quiet and are available with Aluminum or Teflon-coated Aluminum wetted parts. They are an ideal choice for OEM customers.
J系列DIA-VAC®气体采样泵可以*内部安装,可以内置或便携式应用。经济无油,无污染和无泄漏隔膜泵,流量高达13 SLPM,23英寸汞柱,并且单头配置29 PSIG。J系列DIA-VAC®泵是格外安静,铝或聚四氟乙烯涂层铝制零部件。是OEM客户的理想选择。
J-Series Dia-Vac® Performance
J系列DIA-VAC®性能
美国ADI气泵J系列DIA-VAC泵
ADI’s gas sampling Dia-Vac® Pumps can pass your gas at the speed of need! Due to an increased interest in reducing the pressure, vacuum, and/or flow on the Dia-Vac® pumps, our engineers designed a modified eccentric design. This allows you to customize your Dia-Vac®pump to meet your application requirements while at the same time increasing the diaphragm and bearing life. The standard eccentric size is 0.160 on the J-Series Dia-Vac® Pump.
Please note that the chart below is not meant to be read as a combination of pressure and vacuum at the same time, only pressure or vacuum.
ADI公司DIA-VAC®的气体采样泵可以您的速度需求!由于对于降低压力,增加真空度以及流量的兴趣,我们的工程师设计的改性偏心设计。这允许您自定义您的Dia-Vac® 泵,以满足您的应用需求,同时增加隔膜和轴承寿命。标准偏心大小为0.160的 J系列DIA-VAC®泵。
请注意,下面的图表并不是在相同的时间的压力和真空的组合,仅仅压力或真空。
J系列DIA-VAC® 流量平均值 如需详细的流量曲线图请 | ||||||
---|---|---|---|---|---|---|
型号# | PSIG (***大压力) | Bar计 (***大压力) | 汞柱计 (极限真空) | mBar计 (极限真空) | SCFM (***大流量) | SLPM (***大流量) |
J141 | 25.0 | 1.72 | 22.0 | 745 | 0.44 | 12.5 |
J161 | 31.1 | 2.14 | 24.4 | 826 | 0.49 | 14.0 |
美国ADI气泵J系列DIA-VAC泵
试验结果被平均化,并且因此,应考虑近似的。
- 与316SS头,聚四氟乙烯进行的测试®在75°F隔膜,1/4英寸直径的软管点¯x5英尺线,采用STD。在60赫兹1725转电机。
- 这些测试结果仅供参考,并旨在帮助确定哪些泵购买时向用户提供信息。实际的泵性能将取决于用户的应用程序。
- 对于50赫兹的运行,由17%减少产量