GR 进口不锈钢卧式单级离心泵
参考价 | ¥ 28000 |
订货量 | ≥1 |
- 公司名称 上海秉奇阀门有限公司
- 品牌
- 型号 GR
- 产地
- 厂商性质 经销商
- 更新时间 2018/1/24 16:22:00
- 访问次数 343
联系我们时请说明是化工仪器网上看到的信息,谢谢!
进口不锈钢卧式单级离心泵
名称: | 进口不锈钢卧式单级离心泵 | |
压力: | 1.6MPa | |
型号: | GR | |
口径: | DN50-DN100 | |
材质: | 304、316 |
进口不锈钢卧式单级离心泵
- 质量:从铸件到产品,实行全过程质量监控,*检测,责任到人!
- 价格:高效成本控制,自产自销,减少中间环节,让利于客户!
- 交货:充足的库存,上海便捷物流,缩短交货期,严格按照合同期交货!
:
图文
:
产品介绍产品尺寸产品结构PDF下载订货流程服务承诺
英国GRIMM格林进口不锈钢卧式单级离心泵 UK GRIMM Imported stainless steel horizontal single stage centrifugal pump
英国GRIMM格林进口不锈钢卧式单级离心泵概述:
进口不锈钢卧式单级离心泵采用不锈钢板冲压胀型焊接等*工艺制成,是英国格林*的新一代离心泵,可替代传统的GRIS离心泵和一般的耐腐蚀泵。其具有外形美观、结构轻巧、高效节能、经久耐用和耐轻腐蚀、低噪音等特点。
英国GRIMM格林进口不锈钢卧式单级离心泵安装条件:
进口不锈钢卧式单级离心泵为泵轴直联型联结,由泵、泵轴和标准电机组成:
1、泵应安装在通风且防冰冻的地方;
2、泵的安装要保证在使用时泵不受系统管路的张力影响;
3、如果泵安装在户外,必须配置合适的外罩以防止电气元件进水或凝露;
4、为了方便于检查和维修,在机组的周围应必须留有足够的空间;
5、电气接线装置应保证泵不受缺相、电压不稳、漏电和过载的损害;
6、泵应水平安装在基座上,水平方向为泵的吸入口,垂直方向为泵的排出口。
英国GRIMM格林进口不锈钢卧式单级离心泵运行条件:
1、清洁、稀薄、非易燃易爆并不含有固体颗粒和纤维的液体;
2、温度在-20℃至+100℃之间的液体;
3、环境温度zui高+40℃;
4、zui高海拔1000米;
5、系统zui高压力10bar。
英国GRIMM格林进口不锈钢卧式单级离心泵主要参数:
流 量:3-200m3/h
扬 程:10-70m
口 径: 进口直径:50-100mm
出口直径:32-80mm
转 速:2900-2950r/min
功 率:1.1-37kw
液体温度:-20℃~+100℃
电 压:220/380V
频 率:50Hz/60Hz
材 质:304、316
英国GRIMM格林进口不锈钢卧式单级离心泵电机:
电机为全封闭、风冷式二极标准电机;
防护等级:IP55;
绝缘等级:F;
标准电压:50Hz 1×220V
3×380V
英国GRIMM格林进口不锈钢卧式单级离心泵应用:
进口不锈钢卧式单级离心泵是一种适应范围较广的多功能产品,可以输送各种包括水或工业液体在内的不同介质,适用于不同温度、流量和压力范围。
其典型应用主要包括以下方面:
供水:水厂过滤、输送及分区送水和主管增压;
工业增压:流程水系统、清洗系统;
工业液体输送:锅炉给水、冷凝系统、冷却和空调系统、机床配套、酸碱输送;
水处理:蒸馏系统或分离器、游泳池等;
农田灌溉、石油化工、医药卫生等。
UK GRIMM Imported stainless steel horizontal single stage centrifugal pump summary:
Imported stainless steel Horizontal single-stage centrifugal pump, made of stainless steel stamping, expansion welding and other advanced technology, is a new generation of centrifugal pumps pioneered by the British Green, which can replace the traditional GRIS centrifugal pump and general corrosion resistant pump. The utility model has the advantages of beautiful appearance, light structure, high efficiency, energy saving, durability, light corrosion resistance, low noise and the like.
UK GRIMM Imported stainless steel horizontal single stage centrifugal pump installation condition:
Imported stainless steel horizontal single stage centrifugal pump is connected by pump shaft directly. It consists of pump, pump shaft and standard motor:
1.The pump should be installed in a ventilated and anti freezing place;
2.The installation of pumps to ensure that in use, the pump is not affected by the tension of the system piping;
3.If the pump is installed outdoors, it must be equipped with a suitable outer cover to prevent electrical components into the water or condensation;
4.In order to facilitate the inspection and maintenance, in the vicinity of the unit should be left enough space;
5.The electrical wiring device shall ensure that the pump is free from phase failure, voltage instability, leakage and overload damage;
6.The pump should be installed horizontally on the base, the horizontal direction for the suction port of the pump, the vertical direction for the pump outlet.
UK GRIMM Imported stainless steel horizontal single stage centrifugal pump operation condition:
1.Clean, thin, non flammable, explosive, does not contain solid particles and fiber liquids;
2.Temperature between -20 and +100℃ Celsius liquid;
3.The environmental temperature is highest +40℃;
4.The highest elevation of 1000 meters;
5.System maximum pressure 10bar.
UK GRIMM Imported stainless steel horizontal single stage centrifugal pump technical parameters:
Flow rate: 3-200m3/h
Lift: 10-70m
Caliber: inlet diameter: 50-100mm
Outlet diameter: 32-80mm
Speed: 2900-2950r/min
Power: 1.1-37kw
Liquid temperature: -20~+100℃
Voltage: 220/380V
Frequency: 50Hz/60Hz
Material: stainless steel
UK GRIMM Imported stainless steel horizontal single stage centrifugal pump electric machinery:
The motor is fully enclosed and air-cooled type of standard motor;
Protection level: IP55;
Insulation class: F;
Standard voltage: 50Hz 1 x 220V
3 x 380V
UK GRIMM Imported stainless steel horizontal single stage centrifugal pump application:
Imported stainless steel horizontal single stage centrifugal pump is a wide range of multi-functional products, can transport a variety of water or industrial liquids, including different media, applicable to different temperatures, flow and pressure range.
Its typical applications mainly include the following aspects:
Water supply: filtration, transportation and partitioning, water supply and charge pressurization in waterworks;
Industrial pressurization: process water system, cleaning system;
Industrial liquid transportation: boiler feed water, condensing system, cooling and air conditioning system, machine tool matching, acid and alkali transportation;
Water treatment: distillation system or separator, swimming pool, etc.;
Farm irrigation, petrochemical, medical and health care, etc..
进口不锈钢卧式单级离心泵☞:http://www.021fmc。。cn/aspcms/product/2017-7-18/2707.html
GRIMM中国:
上海秉奇阀门有限公司为GRIMM公司在中国的总代理,是中国拥有GRIMM代理权及销售权,主要为中国地区客户提供服务与,同时,秉奇人员也积极参与总部技术培训学习,并不断掌握产品原理、实际运作、工程技术做为基石,完善对中国地区客户需求。
关于GRIMM:
英国格林(GRIMM)有限公司是亚太地区流体控制领域的主要生产和供应商之一,公司总部位于克莱福德,拥有一支有经验的研发队伍,实行统一设计,统一标准,在水泵领域内处于地位。在许多个国家均有生产水泵基地,中国由上海秉奇阀门负责中国市场各项业务与中心,同时向中国市场销售。
英国格林(GRIMM)产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。
英国格林(GRIMM)主要产品有:管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。
服务体系:
GRIMM品质:
GRIMM公司注重产品质量及使用寿命,全部采用*制造技术和生产设备,并坚持不懈研发新产品,为确保不间断的全过程质量控制,在生产过程中采用(SPC)过程控制和(TQM)全面质量管理;GRIMM的严格规范实现了不让品质拖节,有效保障产品每个细节达到的性能指标。
GRIMM专业:
掌握核心的流体控制技术,提供市场的产品、服务和解决方案,帮助用户提高效率,带来至关重要的基础设施。
GRIMM服务:
我们与用户紧密合作,支持一系列系统使用技术和文件报告,提供售前、售中、售后服务和,有了您的信任与支持,我们将更完善、更高效提供水泵流体技术方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
英国格林总代理商:上海秉奇阀门有限公司,咨询:
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., Advisory:
Welcome new and old customers call negotiate!
Contacts:Huang Tianxiang
:
Phone: (同号)
Company Phone:021-51698378
Add:Lane 51, dragon road, Shanghai, Xuhui District