ND780/ND1202R/ND1203R/PT880海德汉HEIDRNHAIN数显表维修

ND 1202 R

ND 1203 R

Axes

2 from A to Z

3 from A to Z

Encoder inputs*

TTL (D-sub female 9-pin) or 1 VPP (D-sub female 15 pin)

Input frequency

≤ 200 kHz

Signal period

Any

Line count

Any

Subdivision factor

TTL: Max. 4-fold

1 VPP: Max. 40-fold

Display step 1)

Adjustable, max. 7 digits

Display

5.7” monochrome flat-panel display for position values, dialogs and inputs, and soft keys

Functions

• Conversion of Cartesian coordinates (X,Y) to polar coordinates (R,A)
• XY/RA switch-over
• Alignment function
• REF reference-mark evaluation for distance-coded or single reference marks
• Distance-to-go display in machine coordinates R and A
• mm/inch switching
• Absolute-incremental display
• Calculation of positions for hole patterns (circular patterns as well as linear patterns)
• Probing functions for workpiece orientation and reference-point acquisition with KT edge finder: "Edge," "Centerline" and "Circle center"

Programming

Hole patterns with a total of 999 hole positions

Cycles

Hole patterns (circular and linear patterns) with max. 100 positions

Error compensation

Linear axis-error compensation as part of calibration

Data interface

• RS-232-C/V.24; 300 to 115 200 baud
• USB type A

Switching inputs

• Zero reset, measured value output (e.g. by foot switch)
• Edge finder (through universal touch probe interface)

Accessories

Mounting arms, KT-130 edge finder, foot switch

Power connection

100 V to 240 V AC (^-15 % to +10 %), 47 Hz to 63 Hz; 30 W

Operating temperature

0 °C to 45 °C (storage temperature –20 °C to 70 °C)

Protection EN 60 529

IP 40

Mounting*

Tilting base or mounting base

Weight

Approx. 1.6 kg