HY-HPC211 摩托车不透光烟度计
具体成交价以合同协议为准
- 公司名称 北京东立环宇电子科技有限公司
- 品牌
- 型号 HY-HPC211
- 产地
- 厂商性质 生产厂家
- 更新时间 2016/7/15 11:22:57
- 访问次数 757
联系我们时请说明是化工仪器网上看到的信息,谢谢!
品牌:东立环宇 型号:HY-HPC211
摩托车不透光烟度计主要功能特点:
分体式结构设计,操作方便,按新国标GBl9758-2005技术要求研制;
采用内置全流式取样技术,测量摩托车急加速、怠速工况时的烟度;
高亮度数码显示,进口关键零部件组装而成;
采用全流式耐高温的特殊取样探头,采样稳定、精确、方便;
开机预热时间10分钟,并自动调零;
数据自动线性化处理,可显示不透光度N、光吸收系数K;
出现故障时自动显示故障代码;
附有自动时钟显示,内置打印机(RS—232或模拟接口联网)供选择。
采用内置全流式取样技术,测量摩托车急加速、怠速工况时的烟度;
高亮度数码显示,进口关键零部件组装而成;
采用全流式耐高温的特殊取样探头,采样稳定、精确、方便;
开机预热时间10分钟,并自动调零;
数据自动线性化处理,可显示不透光度N、光吸收系数K;
出现故障时自动显示故障代码;
附有自动时钟显示,内置打印机(RS—232或模拟接口联网)供选择。
摩托车不透光烟度计主要技术参数:
测量范围 不透光度N: 0~*
光吸收系数K:0~90.65m-1
示值误差 ≤±2%
稳定性 自动校零,量矩漂移≤±1%/4h
分辨率 0.1%
响应时间 1S±0.1S
输 输出方式 LED(4位)显示,可附打印机,打印出5组急加速烟度、怠速烟度、光
吸收系数的zui大值及平均值,测试时间、日期等,可附接口与计算机
联网
环环境条件 温度0~40℃,相对湿度≤90%
电电源 AC100-240V 50/60Hz 消耗功率150VA
外外形尺寸 控制单元:250mm(长)×310mm(宽)×170mm(高)
测量单元:350mm(长)×260mm(宽)×170mm(高)
重重量 控制单元:4kg,
测量单元:5kg
Main Features:
◆Separated structural design, easy to operate, according to the new national standard GBl9758-2005 technical requirements for development.
◆With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
◆High-brightness digital display, import key components assembled.
◆Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
◆Ji machine warm-up time 10 minutes, and automatic zero adjustment.
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
◆Fails automatically displays fault code.
◆With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.
◆With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
◆High-brightness digital display, import key components assembled.
◆Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
◆Ji machine warm-up time 10 minutes, and automatic zero adjustment.
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
◆Fails automatically displays fault code.
◆With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.
Main technical parameters:
Test Scope:No light transmission N: 0~*
Light absorption coefficient K: 0~90.65 m-1
Shows the value error:≤ ± 2%
Stability:Automatic zero, volume moments drift ≤ ± 1% / 4h
Resolution:0.1%
Response Time:1S ± 0.1S
Output Mode:LED (4-bit) display can be attached to the printer 5 groups hard phases
of acceleration smoke, idle smoke, the light absorption coefficient of
the maximum and the average test time, date, etc., can be attached to
interface with the computer network
Environmental conditions:Temperature -5 ~ 50 ℃, relative humidity ≤ 90%
Power:AC100-240V 50/60Hz Power consumption 150VA
Dimensions:Control Box:::240mm (L) × 310mm (W) × 170mm (H)
Flue Box:350mm (L) × 260mm (W) × 170mm (H)
Weight:Control box: 4kg, flue box: 5kg
Environmental conditions:Temperature -5 ~ 50 ℃, relative humidity ≤ 90%
Power:AC100-240V 50/60Hz Power consumption 150VA
Dimensions:Control Box:::240mm (L) × 310mm (W) × 170mm (H)
Flue Box:350mm (L) × 260mm (W) × 170mm (H)
Weight:Control box: 4kg, flue box: 5kg
相关分类
- 烟气分析仪
- 甲醛分析仪
- 粉尘测定仪/粉尘仪
- 红外线气体分析仪
- 多组分气体分析仪
- 一氧化碳分析仪
- 二氧化碳分析仪
- 氨气分析仪/氨分析仪
- 汽车尾气分析仪
- 有毒有害气体监测仪
- 臭氧检测仪
- 烟气/大气重金属在线分析仪
- 高纯气/特气分析系统
- VOC检测仪/TVOC检测仪
- 臭氧分析仪(O3)
- 热导式气体分析仪
- CO、SO2、HCL、NOX、空气检测仪
- PM2.5/PM10/PM1/TSP大气颗粒物监测仪
- 甲烷/非甲烷烃检测仪
- 氮氧化物分析仪(NOX)
- 油烟检测仪
- 恶臭测定仪
- 粉尘采样器
- 气体采样器/大气采样器
- 粒子计数器
- 烟尘采样器、烟气采样器
- 颗粒物采样器
- 零气发生器
- TSP采样器
- 空气微生物采样器
- PM2.5采样器
- PM10采样器
- 粗、细颗粒物双道采样器
- 二噁英采样仪/二噁英采样器
- 酸雨采样器
- 激光雷达
- 太阳光度计
- 尘量分析仪
- 气体稀释仪
- 气溶胶
- 气体在线自动监测系统
- 灰霾监测系统
- 空气质量自动监测系统
- 烟气汞连续监测系统
- 气体报警器/探测器/传感器
- 环境污染事故应急监测仪器
- 温室气体监测仪
- 苏玛罐采样器
- 扬尘监测仪
- 降水/降尘自动采样监测仪
- 烟气汞采样器
- 氨逃逸在线监测系统
- 粒径谱仪
- 其它气体检测