WH.01-HY 表面粗糙度比较样块

表面粗糙度比较样块

Comparison Sample Block of surface Roughness

用途：

     表面粗糙度样块是以比较法来检查机械零件加工表面粗糙度的一种工作量具。通过目测或放大镜与被测加工件进行比较，判断表面粗糙的级别。

APPLICATIONS:

       Comparison Sample Block of surface Roughness is a measuring tool which is sued to check the smooth finish of a mechanical workpiece by comparision method and eye estimation or microscope is used to compare an detect the degree of the surface roughness.

要素“

规格：共分四种

WH.01-HY-1七组样块（车床、刨床、立铣、 平铣、平磨、外磨、研磨）

WH.01-HY-2六组样块（车床、立铣、 平铣、平磨、外磨、刨床、）

WH.01-HY-3笔记本样块（车床、立铣、 平铣、平磨、外磨、研磨）

WH.01-HY-4单组形式（车床样块、刨床样块、立铣样块、 平铣样块、平磨样块、外磨样块、研磨样块）

FEATURES:

Specification :Dibided into four kinds

WH.01-HY-1 Sample block of seven sets（turning shaping vertical milling plain milling plain grinding extermal gringding polishing）

WH.01-HY-2 Sample block of six sets（tuting vertical milling plain ain milling plain grinding extermal gringding polishing））

WH.01-HY-3 Notebook Sample block（tuting vertical milling plain ain milling plain grinding extermal gringding polishing））

WH.01-HY-4 Sample block of single sets（Sample block of turning shaping vertical milling plain milling plain grinding exterimal grinding polishing）

分类及粗糙度参数如表

Classify and rough degree parameter table

a 七组样块（Sample block of seven sets）：

B笔记本样块（Notebook Sample Block）

     在通用的“AA”值中，笔记本样块包含了六种zui重要的机械加工方法的样块标准。所有30种样本都在u”AA（算数平均值）中和等同于umRa的公制中校准。表面粗糙度的比较范围按如下表格中数据进行：、

Notebook sample block contains standards for the six most important maching methods in the prevalent “AA”values All 30specinments are calibrated in “uAA（Arithmetical Average）and in the metric equivalents um ra surface roughness comparison scale are available in the following sets: