尘埃粒子计数器,生物安全柜,净化工作台,风量仪,气溶胶发生器,温湿度压差测试仪,.浮游细菌采样器,光度计,通风柜,传递窗,风淋室,激光尘埃粒子计数器,空气净化器,高效过滤器,层流罩,温湿度表,照度计,声级计,净化检测仪器,洁净烘箱,生物洁净工作台,洁净传递窗,FFU送风单元,洁净采样车,吊装式自净器,除尘器,多点动态实时监测系统,风速仪,在线分析测试,大流量尘埃粒子计数器,,,,净化工程,离子风蛇,Handheld Laser Particle Counter,环境检测仪,Airborne Particle Counter,压差表,压差计,温湿度计,温湿度记录仪,洁净地漏,手消毒器,干手器,落尘测试仪,悬浮粒子计数器,洁净度测试仪,微生物采样器,在线式风速仪,在线式温湿度,落尘仪,过滤器,送风口,回风窗,调节阀,工作服,洁净服,防静电测试仪,超净台,28.3L尘埃粒子计数器,50L尘埃粒子计数器,100L尘埃粒子计数器,尘埃粒子在线监测系统,标准粒子发生器,尘埃粒子计数器校准装置,尘埃粒子计数器检定装置,CLJ-D,CLJ-E,CLJ-E301,CLJ-E3016,CLJ-3016,CLJ-3016H,CLJ-BII,CLJ-BIIH,CLJ-BM,CLJ-BIID,CLJ-BIIJ,FL-1,FL-A1
TDA-5C气溶胶发生器能产生*的多种直径分布的气溶胶粒子，TDA-5C气溶胶发生器与TDA-2G或TDA-2H等气溶胶光度计配合使用时能提供足够的挑战粒子去测量高效过滤系统（流量范围从500-65,000立方英尺/分钟）.
TDA-5C气溶胶发生器的油路保险供应系统和热切换功能是目前zui安全的气溶胶发生器.
TDA-5C Aerosol Generator
TDA-5C气溶胶发生器/悬浮粒子发生器/产尘仪
TDA-5C气溶胶发生器/悬浮粒子发生器/产尘仪简介:
TDA-5C能产生*的多种直径分布的气溶胶粒子，TDA-5C与TDA-2G或TDA-2H等光度计配合使用时能提供足够的挑战粒子去测量高效过滤系统（流量范围从500-65,000立方英尺/分钟）.
TDA-5C的油路保险供应系统和热切换功能是目前zui安全的气溶胶发生器.
TDA-5C 气溶胶发生器/悬浮粒子发生器/产尘仪特点:
气流范围宽（500-65,000CFM）
浓度可调
大容量产尘（可连续4小时检测）
TDA-5C 气溶胶发生器/悬浮粒子发生器/产尘仪应用:
洁净房
层流台
手套箱
HEPA吸尘机
HVAC系统
HEPA过滤器
手术室
核子过滤系统
科研
TDA-5C 气溶胶发生器/悬浮粒子发生器/产尘仪介绍:
TDA-5C能产生*的多种直径分布的空气悬浮粒子，原理是通过加入一定量的气溶胶原液体到一个大的热的区间内，液体被蒸发出并被重新组合后，在仅仅5磅的压力下，通过少量的惰性气体送出，形成含有多种直径的空气悬浮粒子。TDA-5C能产生气溶胶的功效与TDA-2G或TDA-2H等光度计配合使用时能提供足够的挑战粒子去测量高效过滤系统（流量范围从500-65,000立方英尺/分钟）。
TDA-5C具有控制和显示功能都在前面板。这是一个大容量的气溶胶发生器，能连续操作4小时不需要重新填料。它的数字式的温度控制允许操作员去设定在zui适宜的环境下为的悬浮粒子所需的温度。
TDA-5C 是一个热发生的多用途便携式的气溶胶发生器.它是一个理想的对气溶胶浓度或体积变动范围要求很宽的场合.如大的洁净室,或者在一些不能提供压缩空气的地方.TDA-5C为一些苛刻的行业应用提供了一个高容量的解决方案,象一独立的过滤器测试,军工或商业应用上的核设施,医药制造,医疗设备应用及其它应用.要验证洁净房、测试高效过滤系统或个别过滤装置时，TDA-5C是您的选择。
TDA-5C 气溶胶发生器/悬浮粒子发生器/产尘仪技术参数:
系统风量要求 1500 - 65,000立方英尺每分钟（2547-110370立方米每小时）
悬浮粒子浓度 10微克 / 升在 65,000 立方英尺每分钟流量时
悬浮粒子浓度 100微克 / 升在6,500立方英尺每分钟时流量时
产生类型 蒸气冷凝
压缩空气 不需要
压缩气体（惰性气体） 20立方英尺/小时在50psi 压力下
气体类型 多种直径的粒子
尺寸 35cm X 25cm X 25cm （LXH）
重量 9.1 KG
电源 110 VAC / 60 Hz 或 220 VAC / 50hz
英文详细介绍
Description
The 5C Aerosol Generator has been designed to provide operator convenience and improved performance. The 5C is ideal for certifying or testing HEPA filters or installations with air flows from 1,500 to 65,000 cfm. It requires an inert gas source and 115/230 volts @ 750 watts electrical service.
5C Features
The 5C has all controls and displays grouped on the front panel away from the aerosol generator output nozzle. The unit has a large aerosol liquid capacity for operation up to 4 hours at full output without refilling. In addition, its digital temperature control allows the operator to set the unit for optimum conditions for the specific aerosol agent being used.
The 5C is capable of generating a wide variety of aerosol concentrations by discharging a controlled quantity of oil into a large heated area. The liquid is vaporized and condensed into a polydispersed aerosol while in the presence of a small amount of nitrogen delivered at approximay five pounds of pressure. The efficiency at which the aerosol is produced enables the 5C Generator, when used in conjunction with Analog or Digital photometers, to provide enough aerosol to leak test filtration systems from 1,500 to 65,0000 cfm. Systems larger than 6,500 cfm may be tested for leaks at less than 100 micrograms per liter when the photometer sensitivity is increased.
5C Specifications
Aerosol Output Range: 1,500-65,000 cfm
Aerosol Concentration 100 ug/1@*: 6,500 cfm
Aerosol Concentration 10 ug/1@*: 65,000 cfm
Generator Type: Vapor Condensation
Compressed Air: Not Required
Compressed Gas: Nitrogen, Argon, Carbon Dioxide or Helium （*20 cfh @ 50 psi）
Aerosol Type: Polydispersed （Cold）
Size: 15" L × 9" W × 10" H
（38cm L × 23cm W × 25cm H）
Weight-Pounds （lbs）: 23 lbs.
Weight-Kilograms （kg）: 10.4 kg
Electrical: 115 VAC / 60 Hz or 230 VAC / 50hz
Compliance:
| EN61000-6-2:2005 |
| EN61000-6-4:2007 |
| EN61010-1:2001 |
| UL61010-1:2004 |
| FCC Part 15 （7/2008） Class A |
| ICES-003 （CAN/CSA-CEI/IEC 22:02） |
* For high volume output, more uniform particle size, and safety, the liquid is aerosolized, superheated to vapor then recondensed by ambient air into a cold poly-dispersed aerosol. The propellant must be an inert gas since the liquid vapor temperature is above the liquid flashpoint.
Please note:
ATI does not recommend the 5C for certification of Biological Safety Cabinets （BSC's）. Typical BSC flowrates are beneath the level at which a 5C is capable of providing a consistent and stable aerosol output.
NSF/ANSI 49-2002 Annex F, specifies the use of a Laskin nozzle generator or equivalent during certification.
For purposes of this NSF Standard's requirements, the 5C generator is not considered a Laskin nozzle equivalent aerosol generator.
Applications
- Clean Rooms
- HEPA Vacuum Cleaners
- HVAC Systems
- HEPA Filters
- ULPA Filters
- Negative Pressure Filtration Units
- Surgical Suites
- Nuclear Filter Banks
- Collective Protection Filters
- Research and Development
Industries
- Pharmaceutical
- Food Processing
- Veterinary Medicine
- Laboratories
- Asbestos Abatement
- Heavy Metal Processors
- Nuclear Power and Fuel
- Hospitals
- Chemical Processing
- Certifiers
- NBC Defense Agencies
- Governmental Labs
- Filter Manufacturers
- Micro Electronic
- Electronic
- Biotechnology
- Micromechanics
采购中心
化工仪器网