采购中心

美国进口Digi-Sense RTD温度探头

探头zui大误差为±1.1°C + 0.12%低于300°F,±0.35%的指数高于300°F。α系数为0.003850ω/ω/°C(DIN IEC 751)。阻力位在冰点(0°C)是100
注意:时间常数是达到新阅读的63.2%所需的时间。为了确定新阅读的99%需要多长时间，将时间常数乘以5。
注:温度范围仅适用于探头。如果探头根据曝光时间、应用程序和处理材料的不同而高于手柄，则会影响手柄材质。ABS处理是额定220°F(104°C);PVC处理是额定200°F(93°C);不锈钢手柄额定在450°F(232°C);微型连接器是额定392°F(200°C)。

美国进口Digi-Sense RTD温度探头

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 omega/omega/°C (DIN IEC 751). Resistance at ice point (0°C) is 100
Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.
Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

美国进口Digi-Sense RTD温度探头

美国进口Digi-Sense RTD温度探头