您好, 欢迎来到化工仪器网
产品简介
详细介绍
日本HIOS电动螺丝刀SS系列袖珍型/标准型特点:
精密零件组装的吸震型螺丝刀
减轻螺丝刀离合器动作产生的冲击,把对工件的冲击及震动影响控制在zui小范围内,
硬盘驱动器,液晶,高密度基板等各种精密零件的组装
| 拉杆起动式型号 | SS-2000 | SS-3000 | SS-4000 | SS-6500 | SS-7000 | ||
| 输出扭矩范围 | N＊m | 0.02-0.2 | 0.03-0.2 | 0.1-0.45 | 0.25-1.3 | 0.3-2 | |
| lbf＊in | 0.17-1.7 | 0.3-1.7 | 0.9-3.9 | 2.2-11 | 2.6-17.4 | ||
| (kgf＊cm) | 0.2-2 | 0.3-2 | 1-4.5 | 2.5-13 | 3.0-20 | ||
| 扭矩切换 | 无级调节 | 无级调节 |
|
|
| ||
| 无负载转速(r.p.m)±5%(HI/LOW) | 680/490 | 100/670 | 100/690 | 900/600 | 750 | ||
| 适用螺丝规格(mm) | 小螺丝 | 1.0-2.3 | 1.0-2.0 | 1.4-2.6 | 2.0-3.0 | 2.0-4.0 | |
| 自攻螺丝 | 1.0-2.0 | 1.0-1.7 | 1.4-2.3 | 2.0-3.0 | 2.0-4.0 | ||
| 适用刀头 | Hios H4 | Hios H4 | Hios H4 or 1/4HEX | Hios H5 or 1/4HEX | Hios H5 or 1/4HEX | ||
| 适用变压器 | CLT-50 | OK | OK | OK | OK | NG | |
| CLT-65 | OK | OK | OK | OK | OK | ||
| CLT-100 | OK | OK | OK | OK | OK | ||
| MC-70L | OK | OK | OK | OK | OK | ||
| 附件 | 刀头 | (H4) | +#0 φ2.0×40mm 1支 +#0 φ2.5×40mm 1支 | +#0(φ2.0×40mm) 1支 +#0(φ2.5×40mm) 1支 | +#0(φ2.0×40mm) 1支 +#0(φ2.5×40mm) 1支 | NG | NG |
| (H5) | NG | NG | NG | +#1(φ5.0×60mm) 1支 +#2(φ5.0×60mm) 1支 | +#1(φ5.0×60mm) 1支 +#2(φ5.0×60mm) 1支 | ||
| (1/4 HEX) | NG | NG | +#1(φ5.0×50mm) 1支 +#2(φ5.0×50mm) 1支 -(φ5.0×50mm) 1支 | +#1(φ5.0×50mm) 1支 +#2(φ5.0×50mm) 1支 -(φ5.0×50mm) 1支 | +#1φ5.0×50mm 1支 +#2(φ5.0×50mm) 1支 -(φ5.0×50mm) 1支 | |
| 碳刷 | NG | 1对 | 1对 | 1对 | 1对 | |
| 电源线 | 1.5m(5P) | 1.5m(5P) | 1.5m(5P) | 2 m(5P) | 2 m(5P) | |