测量原理 | 常温碱性高锰酸钾氧化法 |
---|---|
测量刻度 | 0, 5, 10, 13, 20, 50, 100 mg/L |
测量时间 | 水温10℃:6 分、水温20℃:5 分、水温30℃:4 分 |
是否可在海水中使用 | 反应速度更快,读取值有偏高的倾向。标准色纸上的读值的半刻度至1个刻度下的值为近似值。 当COD值达到8mg/L以上时,颜色可能会消失,变成无色。 |
内容物 | 软管 50个 (5个装的层压袋 10包), 保存袋 1个, 标准色紙 (盒装) 1个, 使用说明 1张 |
包装外形 | 165L × 110W × 65H mm |
包装重量 | 大约 140 g |
COD is an abbreviation for Chemical Oxygen Demand. There are various methods for measuring COD, that differ in oxidizing agent, reaction time, and reaction temperature; and each method has different oxidizing ratio depending on the type and concentration volume of oxidizable substances. In Japan, standard procedure for using the potassium permanganate method (COD-Mn) indicated in JIS K 0102 17. carried out in acidic medium for 30 min in water bath (100℃) is generally used, but PACKTEST COD utilizes JIS K 0102 19. using the alkaline medium (COD-OH) for presenting the advantage of fast and simple method. Alkaline medium method for JIS, the amount of potassium permanganate consumed in a boiling water bath for 20 min is determined by titration. On the other hand, PACKTEST COD determines the value by change of colors which potassium permanganate is consumed at ordinary temperature. The standard protocol uses glucose for standard solution. Water from the river may have good correlation with official COD-Mn method, but most of the oil, detergents, and other solids do not. When using PACKTEST for wastewater, please check correlation with official method, like JIS in Japan, for better reading.
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,化工仪器网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。