8
SKC旋风采样器
旋风采样器是专为粉尘（气溶胶）抽样呼吸公约中定义的标准en481:1993，使用14 / 3“HSE方法分为一般方法和重采样，分析的吸入和可吸入尘“。
SKC旋风采样器是高度推荐的获得和读取文件中的14／3，进行任何使用旋风采样器在采样。
设计流量为2.2升/分钟，在4μm（微米）的颗粒大小，给出了一个50%的采样效率（切点）
美国SKC的塑料旋风从导电塑料消耗周围大气制造的电荷，防止静电干扰尘埃粒子的收集。
保持在一个可重复使用的塑料盒，这是提供完整的金属过滤器支持
网格和密封夹，以防止样品在运输过程中的实验室分析污染。
有关空气取样的详细说明，特别是旋风采样器的使用。
订货号：
| Description | Pack Size | Part Number |
| Cyclone cassette 25 mm for use with 225-69 | Each | 225-62 |
| Cyclone cassette 37 mm for use with 225-69-37 | Each | 225-62-37 |
| Rubber grit pots | 10 | 225-64 |
| Stainless steel grids without tab 25 mm for use with 225-69 | 10 | 225-66 |
| Stainless steel grids without tab 37 mm for use with 225-69-37 | 10 | 225-66-37 |
| Filter transport cassette 25 mm | Each | 225-67 |
| DPM plastic cyclone 37 mm | Each | 225-68 |
| Plastic cyclone with 25 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69 |
| Plastic cyclone with 37 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69-37 |
| O-rings for Plastic Cyclone (set of 3) | Each | P22569 |
| DPM cassette with 0.8 µm impactor | 10 | 225-317 |
| Without impactor, standard 3-piece clear styrene cassette loaded with 37 mm heat-treated quartz filter, support pad, banded, meets NIOSH 5040 specifications | 50 | 225-401 |
| GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 37 mm | Each | 225-100 |
| GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 25 mm | Each | 225-103 |
| GS-1 Single-inlet Cyclone includes bowl adapter, 37 mm cassette adapter, and grit pot | Each | 225-105 |
| Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 25 mm | Each | 225-101 |
| Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 37 mm | Each | 225-102 |
| Three-piece Filter Cassette Blanks 37 mm | 10 | 225-3LF |
| Three-piece Filter Cassette Blanks 25 mm | 50 | 225-3-25LF |
| Filter Cassette/Cyclone Holder includes: 3 feet of 1/4 inch ID Tygon tubing and a 25 mm adapter ring, for attaching a DPM or standard filter cassette to a worker's clothing in the breathing zone. May be used with or without a cyclone, required when using the GS-1 Cyclone with the DPM Cassette | Each | 225-1 |
| Replacement grit pots for use with GS1 and GS3 cyclones | 25 | P225012 |
| Standard-size Multi-purpose Calibration Jar | Each | 225-111 |
| 25 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones | Each | 225-01-01 |
| 37 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones. | Each | 225-01-02 |
| Calibration Chamber, for 25 and 37 mm cyclones | Each | 225-01-03 |
| Replacement Grit Pot for Aluminium Cyclones | 25 | P225011 |