献县鼎盛路达实验仪器设备厂
中级会员 | 第13年

13930748490

当前位置:献县鼎盛路达实验仪器设备厂>>混凝土试验仪器>>混凝土抗渗仪>> HS-4型混凝土抗渗仪

混凝土抗渗仪

参  考  价面议
具体成交价以合同协议为准

产品型号HS-4型

品       牌

厂商性质生产商

所  在  地沧州市

更新时间:2023-09-07 06:08:23浏览次数:1271次

联系我时,请告知来自 化工仪器网
同类优质产品更多>
HS-4型混凝土抗渗仪
本仪器适用于混凝土抗渗性能的试验的抗渗标号的测定,同时可用于其它建筑材料透气测定和质量检测。主模采用优质钢,台面采用不锈钢板。

 

HS-4型混凝土抗渗仪
本仪器适用于混凝土抗渗性能的试验的抗渗标号的测定,同时可用于其它建筑材料透气测定和质量检测。主模采用优质钢,台面采用不锈钢板。

主要技术参数:
1、抗渗仪zui大压力:5Mpa
2、水泵柱塞直径12,行程10(mm)
3、工作方式:电动手动两用
4、外型尺寸:1100×900×600mm
HCZT-1型程控磁盘振动台
本仪器实验室内震实成型混凝土试件及制品之用。

主要技术参数:
1.台面尺寸: 1m2 0.8m2 0.5m2
2.振动频率: 2860次/分.
3.振  幅: 3-0.6mm
4.电机功率: 1.5KW 380V
 

 
ZH.DG—80型混凝土磁力振动台
主要用于试验室内混凝土抗压试块振实成型。

主要技术参数:
(1) 台面尺寸:800X600mm
(1) 振幅(全幅):0.5mm
(2) 振动频率:50HZ
(3) 每次成型试件数量:1503,试模6个1003,三联试模3条
(4) 净重:约240kg
 
SjD—60型强制式单卧轴混凝土搅拌机
本机适用于建筑科研不口建筑公司及混凝土构件单位试验室,可搅拌普通
混凝土和轻质混凝土,也可用到其它行业试验室对不同物料进行搅拌。

主要技术参数:
(1) 进料容量:96升
(2) 出料容量:60升
(3) zui大出料容量:66升
(4) 搅拌均匀时间:≤45秒
(5) 搅拌轴转速:45转/分
(6) 电动机功率:2.2千瓦
(7) 电源电压:380伏
(8) 外形尺寸:1520X 530X1060mm
 
UJZ-15型砂浆搅拌机
用于建筑工程、大专院校、科研质检部门等作墙体粉面材料及砖砌墙用砂浆强度试验的搅拌机,也适用于人造大理石厂家面料及其它粉末状材料的作业。

主要技术参数:
1、搅拌叶转速(顺时)80±4r/min
2、搅拌筒转速(逆时)60±2r/min
3、搅拌筒容量:15L
4、 搅拌筒内径:380x250mm
 
HVC-1型混凝土拌合物维勃稠度仪
本仪器是测定砼拌合物的维勃稠度值。用于评定混凝土拌合物坍落度在10mm内的混凝土,骨料zui大粒径40mm。符合GBJ80-85的国家标准。

主要技术参数:
震动频率:50±3Hz
电机:0.25千瓦380V
空载振幅:0.5±0.1m
 
HJ-84型混凝土快速养护箱
本仪器适用于施工现场,预制构件科研等单位作混凝土快速养护,它可通过不同加速养护法预测出7天、28天令期砼抗压,抗折强度,是砼质量控制*的设备。

主要技术参数:
1、箱内尺寸:800×580×400mm
2、工作压力:380V
3、电热功率:单组3Kw 计3×3Kw
4、控温范围:10-100℃
5、可放试模:150×150 2组 100×100 3组
 
HC-7L砼含气量测定仪
本仪器适用于集料粒径不大于40mm,含气量不大于10%有塌落度的混凝土拌和物中的含气量,符合交通部发布94-07-05<公路工程水泥混凝土试验规程>(JTJ053-94)的全部规定,该测定方法符合GBJ80-85标准。

HS - 4 type concrete impervious instrument
The instrument applies to concrete impermeable performance test of the anti-permeability label measurement, and at the same time, can be used for other construction materials permeability measurement and quality detection. The main mold is made of high quality steel, mesa is made of stainless steel plate.

Main technical parameters:
1, impervious instrument maximum pressure: 5 mpa
2, pump plunger diameter 12, stroke 10 (mm)
3, work style: electric manual combination
4, outlook size: 1100 x 900 x 600 mm

 

HCZT - 1 type SPC disk vibration table
The instrument for laboratory vibrated forming concrete specimen and the use of products.
Main technical parameters:
1. Mesa dimension: 1 m2 0.8 m2 0.5 m2
2. Vibration frequency: 2860 times/min.
3. Vibration amplitude: 3-0.6 mm
4. Motor power: 1.5 KW 380 v

 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


ZH. DG - 80 type concrete magnetic vibration table
Mainly used for test indoor concrete compressive block vibrated forming.

Main technical parameters:
(1) mesa size: 800 x600mm
(1) amplitude (full width) : 0.5 mm
(2) vibration frequency: 50 hz
(3) every time molding sample quantity: 1503, try die 6 1003, triple test mode 3
(4) the net weight: about 240 kg

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


SjD - 60 type force single lie shaft concrete mixer
The machine is suitable for building research don't mouth construction company and concrete member unit laboratory, can stir ordinary
Concrete and lightweight concrete, can also be used to other industries laboratory for different material mixing.

Main technical parameters:
(1) feed capacity: 96 liters
(2) the discharging capacity: 60 litres
(3) the maximum discharge capacity: 66 liters
(4) stir well time: 45 seconds or less
(5) the stirring shaft speed: 45 RPM
(6) motor power: 2.2 kw
(7) power supply voltage: 380 v
(8) physical size: 1520 x 530 x1060mm

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


UJZ - 15 type mortar mixer
Used in construction engineering, universities and colleges, scientific research quality inspection department, wall powder surface material and brick wall with mortar strength test of the mixer, and can also be applied to artificial marble manufacturer fabrics and other powder material of homework.

Main technical parameters:
1, mixing blade speed (on time) 80 + 4 r/min
2, mixing drum speed (inverse) 60 ± 2 r/min
3, mixing drum capacity: 15 l
4, mixing barrel bore: 380 x250mm

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


HVC - 1 type concrete batch d Bob consistency instrument
This instrument is determination concrete batch dimension of Bob consistency value. Used to assess concrete batch slump in 10 mm in concrete, the largest aggregate size 40 mm. Conform to the GBJ80-85 national standard.

Main technical parameters:
Vibration frequency: 50 ± 3 hz
Motor: 0.25 kw 380 v
Light amplitude: 0.5 + / - 0.1 m

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


HJ - 84 type concrete fast curing box
The instrument is suitable for construction site, prefabricated scientific research units for concrete rapid curing, it can be through the different accelerating curing method predict 7 days, 28 days make period concrete compressive and flexural strength, is the concrete quality control indispensable special equipment.

Main technical parameters:
1, the size: 800 x 580 x 400 mm
2, working pressure: 380 v
3, electric power: unit 3 kw meter 3 by 3 kw
4, temperature control range: 10-100 ℃
5, can be put on trial mode: 150 x 150 2 group 100 x 100 three groups

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


HC - 7 l concrete air meter
The instrument applies to aggregate size is not more than 40 mm, gas content is not more than 10% have slump concrete mixing content of gas content, in line with the ministry of communications issued the 94-07-05 < highway engineering cement concrete test code > (JTJ053-94) all of the provisions, this determination method accord with GBJ80-85 standard.

Asphalt test instrument geotechnical pavement test instrument concrete cement instrument waterproofing materials test instrument engineering plastic mold products are: curing box, mark a box, concrete permeameter, concrete drilling core machine, concrete since falling mixer, cement electric bending machine, planetary cement sand mixer, the products are widely used in colleges and universities, railway, bridge tunnel, petrochemical industry, water conservancy construction, national defense, etc. In the production and sales of independent of products at the same time, our factory and domestic and international famous factory


 

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
拨打电话
在线留言