SMC摆动气爪好,SMC摆动气爪功能 返回列表页

SMC摆动气爪好,SMC摆动气爪功能
Operate so that the workpiece gripping point
distance “L” and the amount of overhang “H” stay
within the range shown for each operating
pressure given in the graphs above.
• If operated with the workpiece gripping point
outside of the range limit, an excessive eccentric
load will be applied to the fingers and guide
section, causing play in the fingers and adversely
affecting the gripper's life.
Switches can be installed to verify
positions for opening and closing of
the gripper and the end of rotation.
All piping and wiring
centralized on one side

SMC摆动气爪好,SMC摆动气爪功能
for easy work operations
Angle adjustment boltsare standard
Provided with reference diameters
at the top and bottom of the body,
and mounting guide pin holes on
three sides of the body along its
center axis (aligned with center ofbody).
Easy adjustment of rotating range
A scale indicator on the side of the gripper
unit allows easy angle adjustments and is
useful for verification of rotating positions.