PELCO Conductive Nickel Paint导电镍漆

PELCO Conductive Nickel Paint导电镍漆

Conductive nickel paint with an acrylic binder. High purity nickel flakes (8-13µm), fast drying with a VOC content of 27.5%. The fast drying nickel paint forms a thin, conductive and flexible layer with good adhesion on most substrates. Can be used to form conductive paths, conductive bonding or conductive painting where silver can't be tolerated, but where high conductivity is required. The conductivity of this nickel cement paint is approximay 20x better than graphite paint and approximay 10% of silver paint. The high oxidation resistance of pure Nickel ensures a long-term conductivity. Nickel is a magnetic material, not suitable for high resolution SEM imaging close to the pole piece in most SEMs. Supplied in a bottle with a brush, 30g. Acetone (#16023) can be used as thinner/extender or as a cleaner to remove the nickel paint.

• Service Temperature: -40 to +120°C (-40 to +248°F)
• Solid contents (nickel): 47-52%
• Binder: Acrylic
• Carrier: Acetone based
• Sheet resistance: 0.7 ohm/sq
• PELCO Conductive Nickel Paint

• 导电镍漆与丙烯酸粘合剂。高纯度镍片（8-13μm），快速干燥，VOC含量为27.5％。快干镍漆形成薄的导电和柔性层，在大多数基材上具有良好的粘附性。可用于形成导电路径，导电键合或导电涂漆，其中银不能容忍，但需要高导电性。这种镍水泥涂料的导电性比石墨涂料好近20倍，约为银涂料的10％。纯镍的高抗氧化性确保了长期导电性。镍是一种磁性材料，不适用于大多数SEM中靠近极片的高分辨率SEM成像。提供一个带刷子的瓶子，30克。丙酮（＃16023）可用作稀释剂/增量剂或清洁剂以除去镍漆。

  使用温度：-40至+ 120°C（-40至+ 248°F）
  固含量（镍）：47-52％
  粘合剂：丙烯酸
  载体：丙酮基
  薄层电阻：0.7欧姆/平方
  PELCO导电镍漆